Rwanda / Reverse osmosis elements
RO Membranes Supplier in Rwanda
Aqua Flair Trading LLC lists nine new RO membranes for Rwanda, from FilmTec, Hydranautics and LG, in 4040 and 8040 sizes. Published flows run from 1,950 to 11,000 GPD, and published salt rejection from 99.4 to 99.85%.
Supplied to Rwanda
RO Membranes
Dissolved salts and fluoride. Filters stop particles. They do not stop dissolved matter. A 2018 presentation on Rwanda’s Rapid Assessment of Drinking Water Quality reports iron, manganese, fluoride, nitrate and pH above limits in some samples, with fluoride up to 5.5 mg/L against a limit of 1.5. A reverse osmosis membrane rejects dissolved ions. Test your own water before choosing.
How we support your project
- Nine new RO elements • FilmTec, Hydranautics and LG • 4040 and 8040 sizes • Published flow 1,950–11,000 GPD • Published rejection 99.4–99.85%
Ideal for
- Brackish borehole water • Water with high fluoride or nitrate (test first) • Bottling and drinks plants • Boiler and process feed • Clinics and hotels with a treatment room
RO Membrane
Filmtec BW30 PRO-4040
View DetailFilmtec SW30-4040
View DetailFilmtec SW30 HRLE-400
View DetailHydranautics CPA3 8040
View DetailHydranautics SWC5-LD
View DetailLG BW 400 R
View DetailLG BW 4040 R
View DetailLG SW 400 R
View DetailRefurbished / Used RO Membranes
Available Brands: Toray and Hydranautics, refurbished with care Available Sizes: 8040 (8″×40″) Available Models: Toray TM820 440/400, Hydrnautics SWC6 Max Origin: USA, JAPAN, KSA
View DetailProduct Detail
Water treatment equipment we supply alongside RO Membrane in Rwanda
A membrane needs clean feed, a vessel and a chemical programme. Our Rwanda pages for those:
• RO pressure vessels to hold the elements
• refurbished RO membranes as a lower-cost option
• cartridge filters as the guard stage
• dosing tanks for antiscalant
• Clack valves for softening ahead of the membrane
• stainless steel housings for a multi-cartridge guard stage
LG BW 4040 R supply for Rwanda
Choose by size, flow and rejection. The 4040 is the smaller element for small skids. The 8040 is the standard industrial size. Read the published flow and rejection side by side.
A mass balance for a brackish borehole
The numbers are assumed to show how the flows and the salt move. Use your own water report.
• Feed TDS: 1,500 mg/L
• Permeate wanted: 120 m³ a day
• Recovery: 75%, so feed needed is 120 ÷ 0.75 = 160 m³ a day
• Concentrate (reject): 160 − 120 = 40 m³ a day
• Salt in: 160 × 1,500 = 240,000 g a day
• Permeate at an assumed 15 mg/L: 120 × 15 = 1,800 g a day
• Salt in the concentrate: 240,000 − 1,800 = 238,200 g, in 40 m³, so about 5,955 mg/L, or roughly 6,000
The concentrate is four times saltier than the feed. That is why scale control matters, and why recovery cannot rise forever.
How many elements? An 8040 listed at 11,000 GPD gives about 41.6 m³ a day (11,000 × 3.785 litres). For 120 m³ a day at 70% of the listed flow, you need 120 ÷ (41.6 × 0.7) = 4.1, so about 5 elements. Real flow depends on temperature, pressure and fouling.
Fluoride. If your borehole is high in fluoride, ask for a trial or a vendor projection before buying.
Where does the concentrate go? Plan for it. In a landlocked country it cannot be sent to the sea, so check what is allowed on site.
Why teams in Rwanda source through Aqua Flair
Send the water report and we quote the elements with the vessels and the chemical tanks they need. The rest of the range sits under water treatment equipment suppliers in Rwanda, and you can read who is behind the quotation on the Aqua Flair Trading LLC page.
• Line by line: Elements, vessels and tanks priced separately.
• Data sheets: Each element page carries its published data.
• Overland delivery: Rwanda has no coast, so cargo comes through a port and then by road. We fix the route once quantity and town are set.
• Water report: Send one and we help check the match.
Our approach
What we stand for
Aqua Flair promises dependable products, professional guidance, and responsive service for water treatment procurement across the regions we serve.
1. Source
borehole, spring, river or tank. Prefer to talk first? Reach our technical team.
2. TDS
mg/L.
3. Volume
m³ a day.
4. Size
4040 or 8040.
Why teams in Rwanda source through Aqua Flair
Send the water report and we quote the elements with the vessels and the chemical tanks they need. The rest of the range sits under water treatment equipment suppliers in Rwanda, and you can read who is behind the quotation on the Aqua Flair Trading LLC page.
• Line by line
Elements, vessels and tanks priced separately.
• Data sheets
Each element page carries its published data.
• Overland delivery:
Rwanda has no coast, so cargo comes through a port and then by road. We fix the route once quantity and town are set.
• Water report
Send one and we help check the match.
Deployment
Applications for RO Membrane in Rwanda
RO plants run at bottling and drinks sites in Kigali, borehole schemes in Bugesera and Nyagatare, mines, and clinics and hotels that treat their own supply. We supply the membranes. A contractor builds and commissions the skid.
Utilities and bulk water
- Brackish RO / Boiler feed / Polishing
Industrial applications
- Bottling / Breweries / Mining
Commercial and institutional
- Hospitals / Hotels / Lodges
Regional project support
Quotation and supply coordination for buyers serving Rwanda.
Element advice
Send the water report and we propose a model.
Dispatch plan
Route and papers settled with you first.
Range
More products sit under the Our Products button, and every family has its own page in the product categories.
Skid quote
Membranes, vessels, pumps and dosing, priced together.
Get in touch
Send us your inquiry
Enter water source, TDS, daily volume, element size and the town in Rwanda.
Call/Whatsapp
+971 50 744 0236Visit us
79WV+VPQ, Al Qusais Industrial Area 3, Dubai, United Arab Emirates