Skip to main content
Region Product

Kuwait · Large-flow cartridges

High Flow Filters Supplier in Kuwait

Aqua Flair Trading LLC, in Dubai, quotes high flow filters for Kuwait. Three polypropylene cartridges, equivalent in format to 3M, Aqualine and Pall types, come in 6 and 6.3 inch diameters, 20, 40 and 60 inch lengths and 1 to 100 µm ratings.

Supplied from Dubai, UAE

High Flow Filters

A seawater intake or a large cooling make-up line can pass hundreds of cubic metres an hour. Filtering that with standard 2.5 inch cartridges means forests of elements and a big housing. A high flow cartridge is wider and pleated, so one element passes far more water.

Tell us the flow and the micron rating and we will compare the options.

How we support your project

  • Three high flow cartridge types • Diameters of 6 and 6.3 inch • Lengths of 20, 40 and 60 inch • Ratings from 1 to 100 micron • Quoted from your flow and rating

Ideal for

  • Seawater intakes ahead of RO • Cooling-tower and chiller make-up • Large process water lines • Plants short of floor space • Projects with a large flow and a fine rating
Request your custom quote todayRequest your custom quote today

Product Detail

Water treatment equipment we supply alongside High Flow Filters in Kuwait

These cartridges sit in a line of coarser and finer stages. The Kuwait pages we combine with them:

• bag filters as the coarse stage ahead of them

• FRP vessels for sand and carbon beds on the same line

• cartridge filters as the fine guard after them

• stainless steel housings the alternative for mid-range flows

• RO membranes the stage at the end

• RO pressure vessels where the filtered water goes


High Flow Filter Cartridge – Pall Equivalent supply for Kuwait

Each cartridge is a polypropylene element with a single open end (SOE), made in 20, 40 and 60 inch lengths, with 1 to 100 µm ratings.

A 180 m³/h intake, counted in parts

Consider a seawater intake of 180 m³/h. (This flow and the 4 m³/h per cartridge below are assumed for illustration.)

With standard 40-inch cartridges. At about 4 m³/h each, the line needs around 45 elements. Four 11×40 stainless steel housings (45 m³/h each) would sit at 100% of their limit, so five are needed, which gives 225 m³/h and an 80% load, with space for 55 cartridges.

Route

Housings

Cartridges

Standard 40 in in 11×40 housings

5

55

High flow cartridges

fewer vessels, quoted from the cartridge’s own flow

far fewer

Why we leave the high flow number open. The page does not state a flow per high flow cartridge. It depends on the type, the length and the micron rating. Ask us for the figure for the type you like, then count the parts.

Housing. The cartridges are quoted without a housing on this page. Tell us the housing you plan to use, or ask what we can quote.

Rating. For a seawater intake, a coarse 50 to 100 µm element protects the downstream stages, and a fine 1 to 5 µm rating is for the polish before RO.

Procurement value

Why teams in Kuwait source through Aqua Flair

A Kuwait enquiry can compare a bank of standard cartridges against a high flow route on one sheet. The rest of the range sits under water treatment equipment supplier in Kuwait, and you can read who is behind the quotation on the Aqua Flair Trading LLC page.

  • • Comparison

    Ask for both routes and see the part counts side by side.

  • • Data sheet

    Each cartridge page carries its specification.

  • • Dubai to Kuwait routing

    Agreed with you once quantities are set.

  • • Replacement planning

    Spares sized to your change interval.

Our approach

What we stand for

Three facts, then a count.

  • 1. Flow

    design flow and peak. Prefer to talk first? Reach our technical team.

  • 2. Rating

    coarse protection or fine polish.

  • 3. Housing

    what the cartridge will sit in.

Deployment

Applications for High Flow Filters in Kuwait

Large intakes serve cooling circuits, RO plants and process units along Kuwait’s coast, from Shuaiba to Al Ahmadi. In those places space is tight and flows are large, which is the case for high flow cartridges. We supply the elements; your engineers decide the housing and layout.

  • Utilities & bulk water

    • Seawater intake / RO feed / Cooling make-up
  • Industrial applications

    • Refinery utilities / Power and water plants / Process water
  • Commercial & institutional

    • District cooling / Large hotels / Hospital plants
  • Regional project support

    Quotation and supply coordination for buyers serving Kuwait.

  • Part count

    We compare standard and high flow routes.

  • Delivery planning

    Sea or road routing from Dubai after the quantity is fixed.

  • Range

    More products sit under the Our Products button, and every family has its own page in the product categories.

  • Joint quotation

    Cartridges, housings and membranes together.

Get in touch

Send us your inquiry

Tell us the flow, the micron rating, the cartridge length, the housing you plan to use, the quantity and the Kuwait address.

Region product quotation inquiry form.

Detailed quotationBuilding a product list?Add multiple products and quantities in one guided request.
Build quotation
Request a quote
Request a quoteWhatsApp