Kuwait · Filter and softener valves
Clack Valves Supplier in Kuwait
Aqua Flair Trading LLC quotes Clack valves from Dubai for Kuwaiti buyers. Seven valves in the WS1, WS1.5 and WS2 families run backwash and regeneration on FRP tanks, from 20 to 125 psi.
Supplied from Dubai, UAE
Clack Valves
A media tank does nothing useful until a valve tells it when to filter, when to backwash and when to regenerate. In Kuwait, where hard brackish water scales pipes and heaters, softener and filter valves are common on hotels, laundries, clinics and small plants.
We supply the valve; your installer fits it to the tank. Tell us the flow and the tank and we match the size.
How we support your project
- Seven Clack valve models in three body sizes • WS1, WS1.5 and WS2 families • Operating pressure of 20 to 125 psi • Valves matched to the tank and the resin or media inside • A quotation by model and quantity
Ideal for
- Softeners on hotels, laundries and kitchens • Sand and carbon filters on FRP tanks • Resin tanks ahead of RO plants • Small commercial and light industrial units • Installers and OEMs who build skids
Product Detail
Water treatment equipment we supply alongside Clack valves in Kuwait
A valve is bought for a tank and a media. The Kuwait pages we most often combine with it:
• FRP vessels the tanks the valve sits on
• filtration media the resin that the valve regenerates
• bag filters as the coarse stage ahead of the tank
• cartridge filters as the fine stage after it
• dosing tanks and pumps for brine and chemical feed
• RO membranes the plant the softener protects
Clack Valve Softener WS1 TC supply for Kuwait
The WS1 passes up to 27 GPM, the WS1.5 up to 60 GPM and the WS2 up to 26.1 m³/h, each at 20 to 125 psi.
From gallons per minute to the valve you need
Clack publishes flow in GPM, and Kuwaiti drawings use m³/h. Multiply GPM by 0.2271 to get m³/h. So 27 GPM is about 6.1 m³/h and 60 GPM is about 13.6 m³/h.
Worked case: a 12 m³/h peak. Take a hospital laundry softener that peaks at 12 m³/h (an assumed illustration).
|
Valve |
Listed flow |
Load at 12 m³/h |
|
WS1 |
about 6.1 m³/h |
cannot carry the peak |
|
WS1.5 |
about 13.6 m³/h |
88% |
|
WS2 |
26.1 m³/h |
46% |
The WS1.5 would run at 88% of its limit at the peak, which leaves little room. The WS2 works at 46% and keeps pressure loss low. When the peak is close to a valve’s limit, step up one size.
What to send us. The tank diameter and height, the media (sand, carbon or resin), the service flow, the peak flow and the cycle you want. With those, the valve is easy to name.
Pressure. Make sure your supply pressure sits inside 20 to 125 psi. Below the minimum the valve may not cycle properly.
Procurement value
Why teams in Kuwait source through Aqua Flair
A Kuwait enquiry can list valves, FRP tanks and media in a single message and receive a single priced answer. The rest of the range sits under water treatment equipment supplier in Kuwait, and you can read who is behind the quotation on the Aqua Flair Trading LLC page.
• Line-item pricing
Each valve is its own line, so you can compare.
• Data sheets
Product pages carry the sheet for your submittal.
• Dubai to Kuwait routing
We agree the route and documents with you first.
• Spares
Add seal kits and spare valves to the first order if you want.
Our approach
What we stand for
Three facts, then a price.
1. Tank
We start from your application, duty conditions, and preferred brands or models.
2. Duty
We help narrow options that fit the stated scope without inventing unsupported product facts.
3. Control
Quotations and clarifications stay tied to the inquiry details you provide.
Deployment
Applications for Clack valves in Kuwait
Hotels and laundries in Kuwait City and Hawalli, clinics, apartment blocks, and small industrial units in Shuwaikh and Farwaniya all rely on softeners and filters that are run by valves like these. We do not install; contractors and plant teams do.
Utilities & bulk water
- Softeners ahead of RO / Sand and carbon filters / Small treatment skids
Industrial applications
- Laundry and dry cleaning / Food kitchens / Light manufacturing
Commercial & institutional
- Hotels / Hospitals / Apartment blocks
Regional project support
Quotation and supply coordination for buyers serving Kuwait.
Size check
We compare your peak flow with each valve’s limit.
Delivery planning
We agree the sea or road route from Dubai after the quantity is fixed.
Range
More products sit under the Our Products button, and every family has its own page in the product categories.
Joint quotation
Valves, tanks and media in one reply.
Get in touch
Send us your inquiry
Name the valve model or the tank size, the service and peak flow, the media, the quantity and the Kuwait address.
Call/Whatsapp
+971 50 744 0236Visit us
79WV+VPQ, Al Qusais Industrial Area 3, Dubai, United Arab Emirates